Review your treatment here
It is the use of cold temperature to break down fat cells. Cryo fat freezing is one of the most popular nonsurgical fat reduction treatments, with over 450,000 procedures performed worldwide. A popular reason why people want cryolipolysis is to spot treat fat bulges that have persisted despite diet and exercise.
cryosculpting body
- Non-Invasive Fat Reduction
- Tighten Loose Skin
- Contour Body for a Sculpted Look
- No Surgery - No Downtime
main benefits
- Up to 3.25 inches Reduction In the First Session
- Spot Treat Tat Bulges That Have Persisted Despite Diet & Exercise.
- Contour the body for a Sculpted Look
- Effective for Fat Reduction
- Effective in Pain Relief, inflammation, muscle disorders
- Minimizes the Appearance of Cellulite
- Tighten and Tone Crepey Skin
- Improves Skin Texture
- Non-Invasive & Surgery-Tree
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a trained specialist assesses the areas you wish to target for fat reduction. They discuss your goals, evaluate your body type, and create a personalized treatment plan tailored to your specific needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the targeted fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin are left unharmed. This step typically takes about 35 to 60 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in fat in the treated areas, with full results typically visible within three months.
During the initial consultation, a trained specialist assesses the areas you wish to target for fat reduction. They discuss your goals, evaluate your body type, and create a personalized treatment plan tailored to your specific needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the targeted fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin are left unharmed. This step typically takes about 35 to 60 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in fat in the treated areas, with full results typically visible within three months.
how it works
EMS, or Electrical Muscle Stimulation, is an advanced body contouring treatment that uses electromagnetic energy to stimulate muscle contractions in targeted areas. These powerful contractions are much more intense than what can be achieved through voluntary exercise, helping to build muscle and burn fat simultaneously. EMS treatments are non-invasive, require no downtime, and are designed to enhance muscle tone and improve overall body contours, making it a popular choice for individuals looking to contour their body without surgery.
EMS Body Treatment
- Non-Invasive Fat Reduction
- Tighten Loose Skin
- Contour Body for a Sculpted Look
- No Surgery - No Downtime
main benefits
- Enhanced Muscle Strength and Definition.
- Increased Muscle Size.
- Buttocks Lift and Firming.
- Stubborn Fat Reduction.
- Diastasis Recti Recovery.
- Pain-Free and Non-Surgical.
- No Downtime or Recovery Needed.
- No Post-Surgical Garments or Pain Medications.
- Quick, 30-Minute Sessions.
- Dual Action: Builds Muscle and Burns Fat.
- Customizable to BMI and Goals.
- No Scarring or Invasive Procedures.
- Boosted Confidence with Natural-Looking Results.
general benefits
High-Intensity Electromagnetic Technology (HI EMT):
EmS employs cutting-edge High-Intensity Electromagnetic Technology (HI EMT) to reshape your body. With each treatment, it strengthens and defines your muscles, enhances muscle size, and sculpts your physique, delivering impressive results like lifted buttocks when targeting the glutes.
Radiofrequency for Fat Loss:
But here's where the real magic happens: Emslim also incorporates Radiofrequency for fat loss. While HI EMT contracts and tones your muscles for definition, Radiofrequency precisely targets and melts away stubborn excess fat. This unique combination propels Emslim into a league of its own – a no-downtime, pain-free, and non-surgical solution that not only helps you define your abs but also lifts your buttocks and achieves remarkable fat loss results.
Convenience and Simplicity:
The best part? EmS ensures a hassle-free experience. Say goodbye to concerns about pain, lengthy recovery times, surgery, anesthesia, post-surgical garments, or post-procedure pain pills. This groundbreaking treatment requires 15-30-minute sessions.
EmS dual-technology approach is your secret weapon, offering the promise of an entirely transformed body without the inconvenience of traditional procedures. Experience the future of body sculpting with EmS and reveal a newer, more confident you.
EmS employs cutting-edge High-Intensity Electromagnetic Technology (HI EMT) to reshape your body. With each treatment, it strengthens and defines your muscles, enhances muscle size, and sculpts your physique, delivering impressive results like lifted buttocks when targeting the glutes.
Radiofrequency for Fat Loss:
But here's where the real magic happens: Emslim also incorporates Radiofrequency for fat loss. While HI EMT contracts and tones your muscles for definition, Radiofrequency precisely targets and melts away stubborn excess fat. This unique combination propels Emslim into a league of its own – a no-downtime, pain-free, and non-surgical solution that not only helps you define your abs but also lifts your buttocks and achieves remarkable fat loss results.
Convenience and Simplicity:
The best part? EmS ensures a hassle-free experience. Say goodbye to concerns about pain, lengthy recovery times, surgery, anesthesia, post-surgical garments, or post-procedure pain pills. This groundbreaking treatment requires 15-30-minute sessions.
EmS dual-technology approach is your secret weapon, offering the promise of an entirely transformed body without the inconvenience of traditional procedures. Experience the future of body sculpting with EmS and reveal a newer, more confident you.
how it works
High-Intensity Focused Electromagnetic (HIFEM) muscle building is a cutting-edge technology that induces intense muscle contractions not achievable through voluntary exercise. It strengthens and defines muscles, helping you achieve your fitness goals faster and more effectively. Whether you want to enhance your athletic performance or simply tone your body,
HIFEM BODY TREATMENT
- Lift & Plumps the Glutes
- Promotes Skin Tightening
- Fat & Cellulite Reduction
main benefits
- Tone and sculpt the muscles of the buttocks, leading to a more defined and shapely appearance
- Firming Effect: It promotes skin firmness, contributing to a tighter and more lifted buttock contour
- Fat Reduction: The procedure targets stubborn fat deposits in the buttock area, resulting in a slimmer and more streamlined silhouette
- Reduced Cellulite: diminishes the appearance of cellulite, smoothing out the skin for a smoother and more even texture
- Improved Skin Texture: By tightening loose or crepey skin, the treatment enhances the overall texture and appearance of the buttocks
- Painless & Non-Invasive: As a non-surgical procedure, it offers the benefits of buttock enhancement without the need for incisions or downtime.
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your fitness goals and body type. They identify the target areas for treatment and develop a personalized plan to achieve the best results.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target areas are marked, and the HiFem applicators are placed on your body. These applicators deliver high-intensity electromagnetic pulses to stimulate muscle contractions.
Step 3: Muscle Stimulation and Fat Reduction
The applicators induce powerful muscle contractions, far beyond what can be achieved through voluntary exercise. These contractions help to build muscle mass and break down fat cells. Each session typically lasts about 30 minutes per target area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the next few weeks, you will notice increased muscle tone and a reduction in fat in the treated areas, with optimal results typically visible after a series of sessions.
During the initial consultation, a specialist evaluates your fitness goals and body type. They identify the target areas for treatment and develop a personalized plan to achieve the best results.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target areas are marked, and the HiFem applicators are placed on your body. These applicators deliver high-intensity electromagnetic pulses to stimulate muscle contractions.
Step 3: Muscle Stimulation and Fat Reduction
The applicators induce powerful muscle contractions, far beyond what can be achieved through voluntary exercise. These contractions help to build muscle mass and break down fat cells. Each session typically lasts about 30 minutes per target area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the next few weeks, you will notice increased muscle tone and a reduction in fat in the treated areas, with optimal results typically visible after a series of sessions.
how it works
This is a non-surgical complete body sculpting treatment that works by melting and destroying fat cells and helping the body stimulate collagen and elastin. This process leads to a slimmer, sleeker look with less fat tissue on the body while also promoting a lifted, firmer look. Lipo cavitation can be performed on the belly, hips, back, arms, butt, or thighs.
LASER LIPO BODY TREATMENT
- Treat All Stages of Cellulite
- Up to 3lbs Reduction
- Tighten Loose or Crepey Skin
- See Results Within First Session
- No Downtime
- No Needles
main benefits
- Up to 3lbs of fat reduction
- Cheaper and safer alternative to liposuction
- See results within first session
- Flattering shape that compliments your figure
- Boosts self-confidence
- No downtime, No needles, No Surgery, No Scarring
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your body and discusses your fat reduction goals. They identify the areas to be treated and create a customized plan to achieve your desired results.
Step 2: Preparation and Laser Application
On the day of the treatment, the target areas are marked, and a laser device is positioned over the skin. The device emits low-level laser energy that penetrates the skin to target the underlying fat cells.
Step 3: Fat Cell Disruption
The laser energy disrupts the fat cell membranes, causing them to release their stored fatty acids, glycerol, and water into the body. The body then naturally processes and eliminates these contents through the lymphatic system. Each session typically lasts about 30-60 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the next few weeks, you will notice a gradual reduction in fat and improved body contours, with optimal results typically visible after a series of sessions.
During the initial consultation, a specialist evaluates your body and discusses your fat reduction goals. They identify the areas to be treated and create a customized plan to achieve your desired results.
Step 2: Preparation and Laser Application
On the day of the treatment, the target areas are marked, and a laser device is positioned over the skin. The device emits low-level laser energy that penetrates the skin to target the underlying fat cells.
Step 3: Fat Cell Disruption
The laser energy disrupts the fat cell membranes, causing them to release their stored fatty acids, glycerol, and water into the body. The body then naturally processes and eliminates these contents through the lymphatic system. Each session typically lasts about 30-60 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the next few weeks, you will notice a gradual reduction in fat and improved body contours, with optimal results typically visible after a series of sessions.
how it works
Ultrasound body contouring, also known as ultrasonic cavitation, is a non-invasive cosmetic procedure that is designed to contour the body by removing fat. The procedure uses high-frequency sound waves to break down fat cells in the targeted area. The destroyed fat cells are then eliminated from the body through the lymphatic system and natural metabolic processes.
ULTRASOUND BODY TREATMENT
- Tighten Loose Skin
- Reduces Diet and Exercise Resistant Fat Areas
- Contours and Tones the Body
- Reduces Cellulite
main benefits
- Treat all stages of cellulite
- Reduce fat and improve skin metabolism
- Tighten and tone loose and saggy skin
- Effective in body contouring
- Detoxifies and exfoliates your skin
- Increase collagen and elastin production
- Reduces diet and exercise resistant fat areas
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your body and discusses your fat reduction goals. They identify the areas to be treated and create a personalized plan tailored to your specific needs.
Step 2: Preparation and Ultrasound Application
On the day of the treatment, the target areas are marked, and a conductive gel is applied to the skin. An ultrasound device is then moved over the area, emitting focused ultrasound energy to penetrate the skin and target the fat cells beneath.
Step 3: Fat Cell Disruption
The ultrasound energy disrupts the fat cell membranes, causing them to break down and release their contents. The body naturally processes and eliminates these fat cell remnants through the lymphatic system. Each session typically lasts about 30-60 minutes, depending on the size of the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following weeks, you will notice a gradual reduction in fat and improved body contours, with optimal results typically visible after a series of sessions.
During the initial consultation, a specialist evaluates your body and discusses your fat reduction goals. They identify the areas to be treated and create a personalized plan tailored to your specific needs.
Step 2: Preparation and Ultrasound Application
On the day of the treatment, the target areas are marked, and a conductive gel is applied to the skin. An ultrasound device is then moved over the area, emitting focused ultrasound energy to penetrate the skin and target the fat cells beneath.
Step 3: Fat Cell Disruption
The ultrasound energy disrupts the fat cell membranes, causing them to break down and release their contents. The body naturally processes and eliminates these fat cell remnants through the lymphatic system. Each session typically lasts about 30-60 minutes, depending on the size of the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following weeks, you will notice a gradual reduction in fat and improved body contours, with optimal results typically visible after a series of sessions.
how it works
Lymphatic Drainage is a gentle, non-invasive massage technique designed to stimulate the body’s lymphatic system. This treatment helps to reduce swelling, detoxify the body, and improve overall circulation, promoting better health and wellness.
Lymphatic Drainage
- Enhances Weight Loss
- Increase Energy
- Eliminate Toxins, Excess Fluids, & Puffiness
main benefits
- Enhances lymphatic circulation for toxin removal
- Effective detoxification for a healthier body
- Supports weight loss
- Minimizes the appearance of cellulite
- Reduces swelling and promotes a toned look
- Improves metabolism for weight management
- Boosts immune system function
- Non-invasive and surgery-free
- Increases energy and vitality
- Aids in post-workout recovery
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your health and discusses your goals for lymphatic drainage. They identify any areas of concern and create a personalized treatment plan tailored to your needs.
Step 2: Preparation and Treatment Setup
On the day of the treatment, you will be comfortably positioned, and the specialist will explain the procedure. They will ensure you are relaxed and ready for the session.
Step 3: Gentle Lymphatic Massage
The specialist uses light, rhythmic strokes and gentle pressure to stimulate the lymphatic vessels, encouraging the natural flow of lymph fluid. This process helps to remove toxins and reduce swelling. Each session typically lasts about 60-90 minutes.
Step 4: Post-Treatment and Results
After the treatment, you may feel relaxed and rejuvenated. There is no downtime, and you can resume normal activities immediately. Over the following days, you may notice reduced swelling, improved skin tone, and a general sense of well-being.
During the initial consultation, a specialist evaluates your health and discusses your goals for lymphatic drainage. They identify any areas of concern and create a personalized treatment plan tailored to your needs.
Step 2: Preparation and Treatment Setup
On the day of the treatment, you will be comfortably positioned, and the specialist will explain the procedure. They will ensure you are relaxed and ready for the session.
Step 3: Gentle Lymphatic Massage
The specialist uses light, rhythmic strokes and gentle pressure to stimulate the lymphatic vessels, encouraging the natural flow of lymph fluid. This process helps to remove toxins and reduce swelling. Each session typically lasts about 60-90 minutes.
Step 4: Post-Treatment and Results
After the treatment, you may feel relaxed and rejuvenated. There is no downtime, and you can resume normal activities immediately. Over the following days, you may notice reduced swelling, improved skin tone, and a general sense of well-being.
how it works
Electro Lymphatic Drainage is an advanced therapy that uses low-frequency electrical impulses to stimulate the lymphatic system. This non-invasive treatment helps to detoxify the body, reduce swelling, and improve overall circulation, promoting better health and wellness.
electro Lymphatic Drainage
- Enhances Weight Loss
- Increase Energy
- Eliminate Toxins, Excess Fluids, & Puffiness
main benefits
- Enhances lymphatic circulation for toxin removal
- Effective detoxification for a healthier body
- Supports weight loss
- Minimizes the appearance of cellulite
- Reduces swelling and promotes a toned look
- Improves metabolism for weight management
- Boosts immune system function
- Non-invasive and surgery-free
- Increases energy and vitality
- Aids in post-workout recovery
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your health and discusses your goals for electro lymphatic drainage. They identify any areas of concern and create a personalized treatment plan tailored to your needs.
Step 2: Preparation and Treatment Setup
On the day of the treatment, you will be comfortably positioned, and the specialist will explain the procedure. They will ensure you are relaxed and ready for the session.
Step 3: Electrical Stimulation
The specialist uses a handheld device that emits low-frequency electrical impulses to stimulate the lymphatic vessels. These gentle pulses help to enhance lymphatic flow, remove toxins, and reduce swelling. Each session typically lasts about 45-60 minutes.
Step 4: Post-Treatment and Results
After the treatment, you may feel relaxed and rejuvenated. There is no downtime, and you can resume normal activities immediately. Over the following days, you may notice reduced swelling, improved skin tone, and a general sense of well-being.
During the initial consultation, a specialist evaluates your health and discusses your goals for electro lymphatic drainage. They identify any areas of concern and create a personalized treatment plan tailored to your needs.
Step 2: Preparation and Treatment Setup
On the day of the treatment, you will be comfortably positioned, and the specialist will explain the procedure. They will ensure you are relaxed and ready for the session.
Step 3: Electrical Stimulation
The specialist uses a handheld device that emits low-frequency electrical impulses to stimulate the lymphatic vessels. These gentle pulses help to enhance lymphatic flow, remove toxins, and reduce swelling. Each session typically lasts about 45-60 minutes.
Step 4: Post-Treatment and Results
After the treatment, you may feel relaxed and rejuvenated. There is no downtime, and you can resume normal activities immediately. Over the following days, you may notice reduced swelling, improved skin tone, and a general sense of well-being.
how it works
Cryolipolysis, utilizing cold temperatures, is particularly effective in diminishing the appearance of a double chin, marking it as a highly sought-after non-surgical treatment for facial contouring and skin tightening. With over 450,000 procedures conducted globally, cryo fat freezing stands out for its ability to target and reduce fat deposits specifically in the chin area, offering a more defined jawline without the need for invasive surgery. This treatment is especially popular among those looking to address stubborn fat beneath the chin and improve the texture of their skin, even after traditional methods like diet and exercise have failed to yield desired results.
CryoSculpting Double Chin Treatment
- Double-Chin Reduction
- Enhance Facial Profile
- Non-Invasive & No Downtime
main benefits
- Double-Chin Reduction
- Spot Treat Fat Bulges That Have Persisted Despite Diet & Exercise.
- Contour the Jawline for a Sculpted Look
- Effective in Pain Relief, inflammation, muscle disorders
- Tighten and Tone Crepey Skin
- Improves Skin Texture
- Non-Invasive & Surgery-Tree
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your chin area and discusses your goals for fat reduction. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area under your chin is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 35-45 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in the double chin and a more contoured jawline.
During the initial consultation, a specialist evaluates your chin area and discusses your goals for fat reduction. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area under your chin is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 35-45 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in the double chin and a more contoured jawline.
how it works
CryoSculpting Facial is a non-invasive treatment that uses controlled cooling to target and eliminate fat cells in the facial area. This procedure helps to reduce fat deposits, tighten the skin, and enhance facial contours, resulting in a more sculpted and youthful appearance.
CryoSculpting Facial
- Reduce Fine Lines
- Reduce Puffiness & Swelling
- Minimize Pores
- Decrease Redness & Inflammation
main benefits
- Enhances facial contours and definition
- Improves skin elasticity and firmness
- Reduces the appearance of fine lines and wrinkles
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with a more youthful look
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your facial structure and discusses your goals for fat reduction and skin tightening. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target areas on your face are marked, and a protective gel pad is applied to safeguard your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the areas to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 30-60 minutes, depending on the size of the treated area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will notice a reduction in facial fat and improved skin tightness, with full results typically visible within three months.
During the initial consultation, a specialist evaluates your facial structure and discusses your goals for fat reduction and skin tightening. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target areas on your face are marked, and a protective gel pad is applied to safeguard your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the areas to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 30-60 minutes, depending on the size of the treated area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will notice a reduction in facial fat and improved skin tightness, with full results typically visible within three months.
how it works
Utilizing cold temperatures, cryolipolysis is renowned for its effectiveness in providing a non-surgical neck lift by specifically targeting and reducing the appearance of saggy and crepey skin. This method, widely known as cryo fat freezing, has been performed in over 450,000 procedures worldwide, demonstrating its popularity for enhancing facial contours and tightening neck skin. It is particularly appealing for individuals seeking to refine their neckline and achieve a more sculpted jawline without undergoing invasive surgery. Cryolipolysis stands out as a sought-after solution for those aiming to eliminate stubborn fat deposits under the chin and enhance the overall texture of their neck skin, offering significant improvements even when diet and exercise fall short.
CryoSculpting Neck Treatment
- Double-Chin Lifting
- Reduce Fine Lines
- Tighten Saggy Skin
main benefits
- Target and Eliminate Saggy Skin on the Neck
- Spot Treat Fat Bulges That Have Persisted Despite Diet & Exercise.
- Effective in Pain Relief, inflammation, muscle disorders
- Tighten and Tone Crepey Skin
- Improves Skin Texture
- Non-Invasive & Surgery-Tree
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your neck area and discusses your goals for fat reduction and skin tightening. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area on your neck is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 35-45 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in neck fat and improved skin tightness,.
During the initial consultation, a specialist evaluates your neck area and discusses your goals for fat reduction and skin tightening. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Applicator Placement
On the day of the treatment, the target area on your neck is marked, and a protective gel pad is applied to protect your skin. The CryoSculpting device, equipped with a cooling applicator, is then positioned over the area to begin the fat-freezing process.
Step 3: Fat Freezing and Breakdown
The applicator delivers controlled cooling to the fat cells beneath the skin, causing them to crystallize and eventually die. During this process, the surrounding tissues and skin remain unharmed. This step typically takes about 35-45 minutes per treatment area.
Step 4: Natural Elimination and Results
Over the following weeks and months, the body's lymphatic system naturally processes and eliminates the dead fat cells. Gradually, you will start to see a reduction in neck fat and improved skin tightness,.
how it works
Facial Peels are a non-invasive cosmetic treatment that involves the application of a chemical solution to the skin. This solution exfoliates the outer layers of dead skin cells, revealing a smoother, clearer, and more youthful complexion beneath.
Facial peels
- Minimize Pores
- Reduce Fine Lines
- Brighten the Skin
main benefits
- Minimizes the appearance of pores
- Reduces acne scars and blemishes
- Promotes collagen production
- Quick and convenient procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with refreshed, glowing skin
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the facial peel. They identify the specific issues to be addressed and create a personalized plan tailored to your needs.
Step 2: Preparation and Chemical Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then applies a chemical solution to your face, carefully selecting the strength and type of peel based on your skin type and desired results.
Step 3: Exfoliation and Peel Process
The chemical solution works by exfoliating the outer layers of dead skin cells. You may experience a tingling or warming sensation during this process, which typically lasts about 10-20 minutes, depending on the type and strength of the peel.
Step 4: Post-Treatment and Results
After the peel, the chemical solution is neutralized and removed. Over the following days, your skin will gradually shed the dead cells, revealing a smoother, clearer complexion. There may be some redness or peeling, but these effects are temporary. Full results are typically visible within one to two weeks, with continued improvement as your skin heals and rejuvenates.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the facial peel. They identify the specific issues to be addressed and create a personalized plan tailored to your needs.
Step 2: Preparation and Chemical Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then applies a chemical solution to your face, carefully selecting the strength and type of peel based on your skin type and desired results.
Step 3: Exfoliation and Peel Process
The chemical solution works by exfoliating the outer layers of dead skin cells. You may experience a tingling or warming sensation during this process, which typically lasts about 10-20 minutes, depending on the type and strength of the peel.
Step 4: Post-Treatment and Results
After the peel, the chemical solution is neutralized and removed. Over the following days, your skin will gradually shed the dead cells, revealing a smoother, clearer complexion. There may be some redness or peeling, but these effects are temporary. Full results are typically visible within one to two weeks, with continued improvement as your skin heals and rejuvenates.
how it works
Jet Plasma Anti-Aging Facial is the next generation technology for skin tightening, collagen production, wrinkle reduction, and elasticity improvement – especially in those areas where previously non-effective and non-surgical options were available
When Jet plasma kills surface bacteria and is anti-inflammatory to aid in calming keratosis, eczema, and rosacea. Jet Plasma is used to tighten the skin, diminish wrinkles, diminish hyperpigmentation, treat acne, scarring, stretch marks and aids in product absorption that otherwise couldn’t penetrate as deep without needle injection.
When Jet plasma kills surface bacteria and is anti-inflammatory to aid in calming keratosis, eczema, and rosacea. Jet Plasma is used to tighten the skin, diminish wrinkles, diminish hyperpigmentation, treat acne, scarring, stretch marks and aids in product absorption that otherwise couldn’t penetrate as deep without needle injection.
jet plasma facials
- Diminish Hyperpigmentation
- Reduce Fine Lines
- No Pain and No Downtime
main benefits
- Treat scarring and stretch marks
- Tighten crepey skin for a more defined profile
- Diminish hyperpigmentation and the appearance of age and dark spots
- Brighten the skin and promotes even skin tone
- Diminish wrinkles and revives fatigued skin
- Aid in product absorption that otherwise couldn’t penetrate as deep without needle injection
- Improves Skin Texture
- Non-Invasive & Surgery-Tree
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Jet Plasma Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld plasma device to deliver targeted energy to the skin. This plasma energy penetrates deep into the skin layers to stimulate collagen production and rejuvenate the skin.
Step 3: Collagen Stimulation and Skin Tightening
The plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your skin will appear more youthful and radiant, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Jet Plasma Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld plasma device to deliver targeted energy to the skin. This plasma energy penetrates deep into the skin layers to stimulate collagen production and rejuvenate the skin.
Step 3: Collagen Stimulation and Skin Tightening
The plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your skin will appear more youthful and radiant, enhancing your overall complexion.
how it works
Jet Plasma Neck Treatment is a non-invasive procedure that uses advanced plasma technology to rejuvenate and tighten the skin on the neck. This treatment stimulates collagen production, reduces fine lines and wrinkles, and enhances skin elasticity, resulting in a firmer and more youthful neck appearance.
jet plasma neck treatment
- Stimulates Collagen Production
- Tightens and Firms Neck Skin
- Reduces Fine Lines and Wrinkles
main benefits
- Improves skin texture and tone
- Enhances skin elasticity and firmness
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with a more youthful neck appearance
- Non-invasive and gentle treatment
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your neck area and discusses your goals for skin rejuvenation. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your neck is thoroughly cleansed to remove any impurities. The specialist then uses a handheld plasma device to deliver targeted energy to the neck. This plasma energy penetrates deep into the skin layers to stimulate collagen production and rejuvenate the skin.
Step 3: Collagen Stimulation and Skin Tightening
The plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your neck will appear firmer and more youthful, enhancing your overall appearance.
During the initial consultation, a specialist evaluates your neck area and discusses your goals for skin rejuvenation. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your neck is thoroughly cleansed to remove any impurities. The specialist then uses a handheld plasma device to deliver targeted energy to the neck. This plasma energy penetrates deep into the skin layers to stimulate collagen production and rejuvenate the skin.
Step 3: Collagen Stimulation and Skin Tightening
The plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your neck will appear firmer and more youthful, enhancing your overall appearance.
how it works
LED Facial is a non-invasive skincare treatment that uses light-emitting diode (LED) technology to address various skin concerns. This treatment helps to reduce acne, fine lines, and wrinkles, improve skin texture, and promote a more radiant and youthful complexion.
led facial
- Reduce Fine Lines
- Minimize Pores
- Immediate Firming Effect
- Reduce Blemishes
main benefits
- Minimizes the appearance of fine lines and wrinkles
- Enhances skin clarity and radiance
- Promotes healing and reduces redness
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with clearer, healthier skin
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the LED Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and LED Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses an LED device to deliver specific wavelengths of light to the skin. These wavelengths target various skin concerns, such as acne, fine lines, and uneven skin tone.
Step 3: Light Therapy and Skin Rejuvenation
The LED light penetrates the skin layers, stimulating cellular activity and promoting collagen production. This process helps to reduce inflammation, kill acne-causing bacteria, and improve overall skin texture and tone. Each session typically lasts about 20-30 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin clarity, texture, and radiance, with full results typically visible after a series of sessions. Your skin will appear healthier and more youthful, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the LED Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and LED Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses an LED device to deliver specific wavelengths of light to the skin. These wavelengths target various skin concerns, such as acne, fine lines, and uneven skin tone.
Step 3: Light Therapy and Skin Rejuvenation
The LED light penetrates the skin layers, stimulating cellular activity and promoting collagen production. This process helps to reduce inflammation, kill acne-causing bacteria, and improve overall skin texture and tone. Each session typically lasts about 20-30 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin clarity, texture, and radiance, with full results typically visible after a series of sessions. Your skin will appear healthier and more youthful, enhancing your overall complexion.
how it works
Microchanneling Facial is a non-invasive skincare treatment that uses fine needles to create microchannels in the skin. This procedure stimulates collagen production and enhances the absorption of topical serums, resulting in improved skin texture, tone, and overall appearance.
MICROCHANNELING FACIAL
- Reduce Fine Lines
- Tightening & Lifting
- Scar Reduction
main benefits
- Reduces the appearance of fine lines and wrinkles
- Minimizes pores and improves skin clarity
- Promotes skin firmness and elasticity
- Quick and minimally painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with a refreshed, youthful complexion
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Microchanneling Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Microchanneling Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with fine needles to create microchannels in the skin. These tiny channels facilitate deeper penetration of topical serums and stimulate collagen production.
Step 3: Serum Infusion and Skin Rejuvenation
As the microchannels are created, the specialist applies a customized serum to your skin. The microchannels allow for better absorption of the serum, enhancing its effectiveness. This process promotes skin healing, rejuvenation, and collagen production. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or swelling, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following days and weeks, you will notice improvements in skin texture, tone, and firmness, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Microchanneling Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Microchanneling Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with fine needles to create microchannels in the skin. These tiny channels facilitate deeper penetration of topical serums and stimulate collagen production.
Step 3: Serum Infusion and Skin Rejuvenation
As the microchannels are created, the specialist applies a customized serum to your skin. The microchannels allow for better absorption of the serum, enhancing its effectiveness. This process promotes skin healing, rejuvenation, and collagen production. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or swelling, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following days and weeks, you will notice improvements in skin texture, tone, and firmness, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
how it works
Microdermabrasion Facial is a non-invasive skincare treatment that exfoliates and removes the outer layer of dead skin cells. This procedure helps to improve skin texture, reduce the appearance of fine lines and wrinkles, and enhance overall skin radiance, resulting in a smoother and more youthful complexion.
microdermabrasion
- Immediate Firming Effect
- Reduce Fine Lines
- Improve Texture
main benefits
- Minimizes the appearance of pores
- Reduces acne scars and blemishes
- Promotes collagen production
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with refreshed, glowing skin
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Microdermabrasion Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Exfoliation
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device to gently exfoliate the outer layer of dead skin cells. This process stimulates cell renewal and collagen production.
Step 3: Vacuum Suction and Skin Rejuvenation
The device simultaneously uses vacuum suction to remove the exfoliated skin cells and impurities from the surface of the skin. This step helps to enhance blood circulation and promote a clearer, more even skin tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. You may experience slight redness, which usually subsides within a few hours. Over the following days, you will notice improvements in skin texture, tone, and radiance, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Microdermabrasion Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Exfoliation
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device to gently exfoliate the outer layer of dead skin cells. This process stimulates cell renewal and collagen production.
Step 3: Vacuum Suction and Skin Rejuvenation
The device simultaneously uses vacuum suction to remove the exfoliated skin cells and impurities from the surface of the skin. This step helps to enhance blood circulation and promote a clearer, more even skin tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. You may experience slight redness, which usually subsides within a few hours. Over the following days, you will notice improvements in skin texture, tone, and radiance, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
how it works
Nano-Needling Facial is a non-invasive skincare treatment that uses a device with tiny needles to create micro-channels in the skin. This procedure enhances the absorption of topical serums, stimulates collagen production, and improves skin texture and tone, resulting in a more radiant and youthful appearance.
Nano-Needling Facial
- Immediate Firming Effect
- Reduce Fine Lines
- Improve Texture
main benefits
- Minimizes the appearance of pores
- Reduces acne scars and blemishes
- Promotes collagen production
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with refreshed, glowing skin
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Nano-Needling Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Nano-Needling Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with nano-sized needles to create micro-channels in the skin. These tiny channels facilitate deeper penetration of topical serums and stimulate collagen production.
Step 3: Serum Infusion and Skin Rejuvenation
As the micro-channels are created, the specialist applies a customized serum to your skin. The micro-channels allow for better absorption of the serum, enhancing its effectiveness. This process promotes skin healing, rejuvenation, and collagen production. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or swelling, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following days and weeks, you will notice improvements in skin texture, tone, and firmness, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Nano-Needling Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Nano-Needling Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with nano-sized needles to create micro-channels in the skin. These tiny channels facilitate deeper penetration of topical serums and stimulate collagen production.
Step 3: Serum Infusion and Skin Rejuvenation
As the micro-channels are created, the specialist applies a customized serum to your skin. The micro-channels allow for better absorption of the serum, enhancing its effectiveness. This process promotes skin healing, rejuvenation, and collagen production. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or swelling, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following days and weeks, you will notice improvements in skin texture, tone, and firmness, with full results typically visible after a series of sessions. Your skin will appear smoother and more youthful, enhancing your overall complexion.
how it works
Thermal Plasma Facial is a non-invasive skincare treatment that uses thermal plasma technology to deliver energy to the skin, stimulating collagen production and rejuvenating the skin. This procedure helps to tighten and firm the skin, reduce fine lines and wrinkles, and improve overall skin texture and tone, resulting in a more youthful and radiant appearance.
thermal plasma facial
- Reduce Fine Lines
- Minimize Pores
- Tighten Saggy Skin
main benefits
- Improves skin texture and tone
- Enhances skin elasticity and firmness
- Minimizes pores and improves skin clarity
- Quick and painless procedure
- Safe and effective for various skin types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with a refreshed, youthful complexion
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Thermal Plasma Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device to deliver thermal plasma energy to the skin. This energy penetrates deep into the skin layers, stimulating collagen production and rejuvenating the skin.
Step 3: Collagen Stimulation and Skin Tightening
The thermal plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your skin will appear more youthful and radiant, enhancing your overall complexion.
During the initial consultation, a specialist evaluates your skin type and concerns, discussing your goals for the Thermal Plasma Facial. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Plasma Application
On the day of the treatment, your skin is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device to deliver thermal plasma energy to the skin. This energy penetrates deep into the skin layers, stimulating collagen production and rejuvenating the skin.
Step 3: Collagen Stimulation and Skin Tightening
The thermal plasma energy stimulates the skin’s natural healing response, promoting collagen and elastin production. This process helps to tighten the skin and improve its texture and tone. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you can immediately resume normal activities as there is no downtime required. Over the following days and weeks, you will notice improvements in skin texture, tone, and tightness, with full results typically visible after a series of sessions. Your skin will appear more youthful and radiant, enhancing your overall complexion.
how it works
Semaglutide is a game-changing medication that is revolutionizing weight loss. Unlike other weight loss treatments that merely suppress appetite, semaglutide works by rewiring the body's natural hunger signals, helping to reduce cravings and promote satiety. Its innovative approach to weight loss has been proven effective in clinical trials, with patients experiencing significant weight loss and improved overall health. With semaglutide, you can finally achieve the body you've always wanted - without sacrificing your favorite foods or feeling hungry.
semaglutide
- Weight Loss Accelerator with Weekly Treatments
- Metabolism Boosting Lipo Plus Treatments
- Start Removing Inches off the Waist
main benefits
- Semaglutide can help you lose weight and keep it off.
- It works by reducing appetite and increasing feelings of fullness.
- Semaglutide can improve blood sugar control and reduce the risk of type 2 diabetes.
- It may also improve heart health and reduce the risk of heart disease.
- Semaglutide is easy to use and can be self-administered via a weekly injection.
- It has been extensively tested and is approved by the FDA for weight loss.
- Semaglutide can help you achieve long-term weight loss success and improve overall health.
general benefits
Semaglutide helps you manage your weight effectively. It curbs your appetite, making healthier food choices easier and reducing overeating tendencies.
Our specialized Lipo Plus injections work with Semaglutide to enhance fat metabolism. This combination accelerates fat loss and supports your body's natural processes.
Our expert nutritionists guide you through personalized strategies that align with your goals and Semaglutide's effects. This ensures you're equipped with the knowledge to sustain a balanced lifestyle.
Stay on track effortlessly with our app, which provides meal planning based on your preferences and goals, optimized for Semaglutide's benefits.
Our specialized Lipo Plus injections work with Semaglutide to enhance fat metabolism. This combination accelerates fat loss and supports your body's natural processes.
Our expert nutritionists guide you through personalized strategies that align with your goals and Semaglutide's effects. This ensures you're equipped with the knowledge to sustain a balanced lifestyle.
Stay on track effortlessly with our app, which provides meal planning based on your preferences and goals, optimized for Semaglutide's benefits.
how it works
Microchanneling for Hair Loss is a non-invasive treatment that uses a specialized device with fine needles to create microchannels in the scalp. This procedure stimulates the scalp, promotes hair growth, and enhances the absorption of hair restoration serums, resulting in thicker and healthier hair.
semaglutide
- Treat Hair Loss
- Stimulate Hair Regrowth
- Unveil Thicker Hair
- Promote Beard Growth
main benefits
- Reduces hair thinning and shedding
- Promotes stronger and thicker hair
- Increases blood circulation to the scalp
- Quick and minimally painful procedure
- Safe and effective for various hair types
- Minimal discomfort and recovery time
- No surgery or anesthesia required
- Boosts confidence with improved hair density
general benefits
Step 1: Consultation and Assessment
During the initial consultation, a specialist evaluates your hair and scalp condition, discussing your goals for hair restoration. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Microchanneling Application
On the day of the treatment, your scalp is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with fine needles to create microchannels in the scalp. These tiny channels facilitate deeper penetration of hair restoration serums and stimulate the scalp.
Step 3: Serum Infusion and Stimulation
As the microchannels are created, the specialist applies a customized hair restoration serum to your scalp. The microchannels allow for better absorption of the serum, enhancing its effectiveness. This process promotes hair growth and rejuvenation. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or sensitivity on the scalp, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following weeks and months, you will notice improvements in hair thickness, strength, and overall scalp health, with full results typically visible after a series of sessions. Your hair will appear fuller and healthier, enhancing your overall appearance.
During the initial consultation, a specialist evaluates your hair and scalp condition, discussing your goals for hair restoration. They identify the specific areas to be treated and create a personalized plan tailored to your needs.
Step 2: Preparation and Microchanneling Application
On the day of the treatment, your scalp is thoroughly cleansed to remove any impurities. The specialist then uses a handheld device with fine needles to create microchannels in the scalp. These tiny channels facilitate deeper penetration of hair restoration serums and stimulate the scalp.
Step 3: Serum Infusion and Stimulation
As the microchannels are created, the specialist applies a customized hair restoration serum to your scalp. The microchannels allow for better absorption of the serum, enhancing its effectiveness. This process promotes hair growth and rejuvenation. Each session typically lasts about 30-45 minutes, depending on the treated area.
Step 4: Post-Treatment and Results
After the treatment, you may experience slight redness or sensitivity on the scalp, which usually subsides within a few hours. There is minimal downtime, and you can resume normal activities shortly after. Over the following weeks and months, you will notice improvements in hair thickness, strength, and overall scalp health, with full results typically visible after a series of sessions. Your hair will appear fuller and healthier, enhancing your overall appearance.
how it works
